Home
About Us
Services
Textile Lab Equipment
Textile Lab consumable
Textile Machinery
Used / Reconditioned Equipment
Force &  Measuring Equipment
Textile Test Methods
Laboratory Furniture
Medical Equipment
 Photo Gallery
Health  Care
Textile Testing Videos
Dairy & Packing Machinery
UPS Inverters
Link Exchange
Free Ads Directory
Whois Lookup
IP to country Locator

Contacts

 
 

TOY TESTING EQUIPMENT 

Bite Tester

Bite Tester is the toy surface of the tooth test which uses to imitate a child of the outstanding department (go together with) piece acceptance bite the ability of dint. Bite Tester belong to the test item of the toy safety.

 

Standard: 16CFR 1500

Click for more details....

Click for more details

 

BTG Torque Gauge

BTG torque gauge is a test tool of testing tiny torque and reinforced products in both directions of clockwise and anticlockwise. The tester can be used to inspect and research torque need to install tiny parts.

 

Standards: ISO 8124-1, EN-71-1, ASTM F963, 16CFR 1500

Click for more details....

Click for more details

 

Sharp Edge Tester

The Sharp Edge Tester is used to determine whether accessible edges on

Child-related products are likely to cause injury before or after use or abuse. It is applicable to child-related products for children of no more than ninety-six months,

A self-adhesive PTFE tape is attached onto the mandrel which is then rotated for a single 360 degree revolution along the accessible edge to test and applies 1.35lbs on the

accessible edge. If the tap is cut in half or longer in length (approx.05inch), the edge is identified as a hazardous sharp edge.

 

Standard: 19 CFR 1500.49 ASTM F 963 4.7 EN-71 1998 8.11

Click for more details....

Click for more details

 

 

 

 

 

Sharp Point Tester

The Sharp Point Tester is use can touch to examining a toy of position whether the
existence endanger safe of sharp-edged sharp point. Belong to the test item of the toy safety.

All accessories made from non rust material. It is consistent to the request of technical parameter of all countries.


Standards: ISO 8124-1, EN-71-1, ASTM F963, 16CFR 1500

Click for more details....

Click for more details

 

Small Part Cylinder

The Small Part Cylinder is the throat which uses to imitate a child under 3 years of age to test whether small article may pass or not. Belong to the test item of the toy safety. BE make into by the whole stainless steel material, the surface is turned a processing by bluntness.

 

Standards: 16CFR1500.48, ASTMF9634.8, EN-7119988.2, ISO8124

Click for more details....

 

Click for more details

 

Mouth Actuated Toy Durability Tester
To prevent mouth moving toys or children's mouthpiece has been mistakenly inhaled and cause a choking hazard.

It is Satisfied conditions create 295 10cm3 gas volume within 5s at least.
Equipped with imported high-precision pressure gauge. The pressure gauge use digital display to avoid damage if use pointer display.

Standard: ASTM F963 8.13, EN71-1-05 8.17.

Click for more details....

 

Click for more details

 

PAGE VISITED

TIMES free counters

                                      

   Copyright 2004-2012 Mars Traders All Rights Reserved